Import CardioPerfect® Tests

NextGen® Enterprise EHR Help

Import Diagnostic Cardiology Suite™ Tests

If a test report exists in Diagnostic Cardiology Suite™ but not in IEM, then you can import the report into IEM as follows: In the Diagnostic Cardiology Suite™ application, select an existing report from the list in the lower left pane. Selecting a report in Diagnostic Cardiology Suite Select the Sign button (Sign) button, then enter a signer name and select OK. Signing a report in Diagnostic Cardiology Suite The report appears in the IEM grid. Imported Report in IEM Grid Parent topic: Import Tests from Welch Allyn

NextGen® Enterprise EHR Help

Create GE Spirometry Reports

Before you start recording, ensure that the equipment is connected to the PC. For more information on how to use GE CardioSoft functionality, refer to the GE CardioSoft Operator's Manual. Prepare the patient for the test as needed. In NextGen® Enterprise EHR, load a patient and select a location and provider. Open the Integrated Equipment Module. Select Acquire Report and select GE CardioSoft Spirometry. The GE CardioSoft application starts and displays the Test Information window. Before the test starts: Configure and select the appropriate settings as needed. Explain the test procedure to the patient. On the Test Information window: For each tab, enter or select all relevant information and select OK. If you are performing a Flow-Volume measurement: Select the Start Test button. If prompted, select OK to confirm that the patient is not yet breathing through the sensor. Have the patient exhale and inhale as directed. Select the Stop Test button. Repeat the test as needed. Select Best

NextGen® Enterprise EHR Help

Create Welch Allyn® Spirometry Reports

In NextGen® Enterprise EHR, load a patient and select a location and provider. Open the Integrated Equipment Module From the Acquire Report list, select Welch Allyn Spirometry. Capture an spirometry report as described in the appropriate Welch Allyn® Diagnostic Cardiology Suite™ or CardioPerfect® spirometry user manual. Close the Diagnostic Cardiology Suite™ or CardioPerfect® Workstation application to return to the IEM.A new Welch Allyn Spirometry report appears in the IEM grid and an (Equipment Report) indicator appears in the History toolbar under the encounter. If you confirmed the interpretation, the Test Status column in the IEM grid displays Confirmed; otherwise, it displays UNCONFIRMED. For more information on how to use spirometry functionalities, refer to the appropriate Hillrom™ Welch Allyn® CardioPerfect® Spirometry manual. Parent topic: Hillrom Welch Allyn Devices

NextGen® Enterprise EHR Help

Create Welch Allyn® Resting ECG Reports

Before you begin Before you start recording, ensure that the device is connected to the PC. In NextGen® Enterprise EHR, load a patient and select a location and provider. Open the Integrated Equipment Module. From the Acquire Report list, select Welch Allyn ECG.The Diagnostic Cardiology Suite™ or CardioPerfect® Workstation application starts and opens the ECG capture screen. Capture an ECG as described in the appropriate Welch Allyn® Diagnostic Cardiology Suite™ or CardioPerfect® resting ECG user manual. Close the Diagnostic Cardiology Suite™ or CardioPerfect® application to return to the IEM.A new Welch Allyn Resting ECG report appears in the IEM grid and an (Equipment Report) indicator appears in the History toolbar under the encounter. If you confirmed the interpretation, the Test Status column in the IEM grid displays Confirmed; otherwise, it displays UNCONFIRMED. Parent topic: Hillrom Welch Allyn Devices

NextGen® Enterprise EHR Help

Create Welch Allyn® Exercise ECG Reports

Before you start recording, ensure that the device is connected to the PC. Note: Welch Allyn® exercise ECG reports are supported only by CardioPerfect® and not by the Diagnostic Cardiology Suite™ . In NextGen® Enterprise EHR, load a patient and select a location and provider. Open the Integrated Equipment Module From the Acquire Report list, select Welch Allyn Exercise ECG.The CardioPerfect® Workstation application starts and opens theNew Exercise ECG window. On the New Exercise ECG window: If needed, select the General tab and in the Test section: Enter the Target heart rate or the percentage of the predicted maximum heart rate. Select the Referring physician, Ordering physician, or Attending physician. Note: If a physician does not exist for a particular type (that is, Referring, Ordering, or Attending), select the pertinent Ellipsis (Ellipsis) button to add one. In the Protocol section: Select the Exercise protocol that you want to use. Select a Blood pressure protocol to indicate h

NextGen® Enterprise EHR Help

View Welch Allyn® Reports

Access the Integrated Equipment Module. Select a Welch Allyn ECG, Welch Allyn Exercise ECG, or Welch Allyn Spirometry report from the IEM grid. Note: Welch Allyn® Exercise ECG reports are supported only by CardioPerfect® and not by the Diagnostic Cardiology Suite™ . Select View Report. The Diagnostic Cardiology Suite™ or CardioPerfect® Workstation application starts and displays the report. Report Displayed in Diagnostic Cardiology Suite Use the tabs to view additional information as needed. Close the Diagnostic Cardiology Suite™ or CardioPerfect® Workstation application to return to the IEM. Parent topic: Hillrom Welch Allyn Devices

Import CardioPerfect® Tests

Recommendations

Import Diagnostic Cardiology Suite™ Tests

Create GE Spirometry Reports

Create Welch Allyn® Spirometry Reports

Create Welch Allyn® Resting ECG Reports

Create Welch Allyn® Exercise ECG Reports

View Welch Allyn® Reports

Import Diagnostic Cardiology Suite™ Tests

Create GE Spirometry Reports

Create Welch Allyn® Spirometry Reports

Create Welch Allyn® Resting ECG Reports

Create Welch Allyn® Exercise ECG Reports

View Welch Allyn® Reports