Delete GE Reports

NextGen® Enterprise EHR Help

Create GE Stress ECG Reports

Before you start recording, ensure that the equipment is connected to the PC. For more information on how to use GE CardioSoft, refer to the appropriate GE CardioSoft Operator's Manual. Prepare the patient for the test as needed. In NextGen® Enterprise EHR, load a patient and select a location and provider. Open the Integrated Equipment Module. Select Acquire Report and select GE CardioSoft Stress ECG. The GE CardioSoft application starts and displays the Test Information window. On the Test Information window: For each tab, enter or verify all relevant information and select OK. Before the test starts: Check the applied electrodes and verify the signal quality in all leads. If needed, configure and select appropriate settings and protocols. Select the F1: pretest button to start the Pretest phase. In the Pretest phase: Select the 12SL analysis button to acquire and analyze a baseline ECG. Select the F1: pretest button to advance to the next stage in the selected protocol. After the la

NextGen® Enterprise EHR Help

Create GE Resting ECG Reports

Before you start recording, ensure that the equipment is connected to the PC. For more information on how to use GE CardioSoft, refer to the GE CardioSoft Operator's Manual. Prepare the patient for the test as needed. In NextGen® Enterprise EHR, load a patient and select a location and provider. Access the IEM. Select Acquire Report and select GE CardioSoft Resting ECG. The GE CardioSoft application starts and displays the Test Information window. Before the test starts, configure and select the appropriate settings as needed. On the Test Information window: For each tab, enter or verify all relevant information. Then select OK. If you are performing a: 10-second ECG with analysis, select the ECG Acquisition button. Full disclosure ECG, select the Start Full Disclosure ECG button. Select the Stop FD/Post Test Review button to stop the test and display the Test Summary window. Use the tabs at the top of the page to view additional data. Perform any post-test related tasks by clicking th

NextGen® Enterprise EHR Help

View and Modify GE Reports

For more information on how to use GE CardioSoft, refer to the GE CardioSoft Operator's Manual. Access the Integrated Equipment Module. Select a GE CardioSoft Resting ECG, GE CardioSoft Stress ECG, GE CardioSoft Spirometry, or GE CardioSoft Ambulatory Blood Pressure report from the IEM grid. Select View Report. The report opens in a new GE CardioSoft window. Use the Modify buttons to edit information as needed. Close the GE CardioSoft window to return to the IEM. Parent topic: GE CardioSoft Equipment

NextGen® Enterprise EHR Help

Delete Midmark Reports

Midmark reports are stored in the NextGen database. Access the IEM Open the Integrated Equipment Module. From the IEM grid, select a Midmark report and select Red X (Delete) on the top toolbar. A confirmation message appears. Select Yes to confirm the deletion. Note: For more information on deleting the report PDF, see the Deleting an Equipment Report PDF from an Encounter section. Parent topic: Midmark Equipment

NextGen® Enterprise EHR Help

Delete Hillrom™ HeartCentrix® Reports

Hillrom™ HeartCentrix® (former Cardiac Science) reports are stored in the Cardiac Science database, while references to the reports are stored in NextGen® database. As a result, you must delete the report and associated references from both places. Open the Integrated Equipment Module From the IEM grid, select any Cardiac Science report and select View Report. A Cardiac Science report opens. In either Edit or Edit Demographics modes, select the Options menu on the Main toolbar and choose Delete Test. Note: Deleting a report prevents a user from accessing a test. The test is still stored in HeartCentrix® and can be reactivated with assistance from HeartCentrix® Technical Support. With the same report selected in the IEM grid, select the Red X(Delete) button on the top toolbar.A confirmation message appears. Select Yes to confirm the deletion. Note: For more information on deleting the report PDF, see the Deleting an Equipment Report PDF from an Encounter section. For more information on

NextGen® Enterprise EHR Help

Delete GE Reports

GE reports are stored in the GE CardioSoft database, while references to the reports are stored in NextGen® database. As a result, you must delete the report and associated references from both places. For more information on how to use GE CardioSoft, refer to the GE CardioSoft Operator's Manual. Open the Integrated Equipment Module From the IEM grid, select any GE report and select the Red X (Delete) button on the top toolbar. A confirmation message appears. Select Yes to confirm the deletion. For more information on how to use GE CardioSoft, refer to the GE CardioSoft Operator's Manual. Parent topic: GE CardioSoft Equipment

Delete GE Reports

Recommendations

Create GE Stress ECG Reports

Create GE Resting ECG Reports

View and Modify GE Reports

Delete Midmark Reports

Delete Hillrom™ HeartCentrix® Reports

Delete GE Reports

Delete GE Reports

Create GE Stress ECG Reports

Create GE Resting ECG Reports

View and Modify GE Reports

Delete Midmark Reports

Delete Hillrom™ HeartCentrix® Reports

Delete GE Reports