Change Code Display Order
The cast and splint grid is sorted by type, body part, and then description. You can change the order in which you want the items to display.
Recommendations
NextGen® Orthopedic Suite Help 80.2.14.0
The cast and splint code configuration grid comes pre-loaded with some fiberglass cast and splint codes. You can also add additional codes. On the Cast & Splint Configuration practice template, expand the Cast & Splint panel. Cast and Splint panel on the Cast and Splint Configuration template In the corresponding fields below the grid, select the following: Splint or cast type Intended body part for the selected splint or cast Application code Supply code The description for selected application code appears in the field below Item column of the grid. You can edit the description, if required. For Side, select L/R or Finger. The L/R option builds that item for the left and right sides. The Finger option builds that item for all 10 fingers. Modifiers built in the File Maintenance application are pulled into Finalize Visit template automatically based on the side/finger selected. Click Add - Update. Parent topic: Manage Cast and Splint CodesAdd a Cast or Splint Code
NextGen® Orthopedic Suite Help 80.2.14.0
You can remove the codes from cast or splint that is not used or billed out by your practice. On the Cast & Splint Configuration practice template, expand the Cast & Splint panel. Select the desired cast or splint in the grid. The selected item displays a check mark in the first column. Click Delete. Parent topic: Manage Cast and Splint CodesRemove Codes from a Cast or Splint
NextGen® Orthopedic Suite Help 80.2.14.0
You can add waterproofing to a cast or splint, using the fields below the WP Tape, # Rolls, and WP Liner columns of the grid. Note: If waterproofing is not enabled, these fields will be grayed out on the configuration template (and on the medical record template). To enable waterproofing, open the Waterproofing panel and select the Enable cast waterproofing check box. There must also be entries in the Waterproofing grid. On the Cast & Splint Configuration practice template, expand the Cast & Splint panel. Cast and Splint panel on the Cast and Splint Configuration template From the grid, select the desired splint or cast. The values for the selected record appear in the corresponding fields below the grid. Select the waterproofing codes in the WP Tape and WP Liner fields. Enter in a default number of rolls for selected WP Tape. This number fills the field on the medical record template when waterproofing is selected. It can be changed on the medical record template if a different quantiAdd Waterproofing to a Cast or Splint
NextGen® Orthopedic Suite Help 80.2.14.0
You can manage cast and splint supply codes, and waterproofing codes that are billed through the NextGen® Orthopedic Suite templates from the Cast & Splint panel of the Cast & Splint Configuration practice template. Cast and Splint panel on the Cast and Splint Configuration template Add a Cast or Splint Code Add Waterproofing to a Cast or Splint Remove Codes from a Cast or Splint Change Code Display Order Parent topic: Cast and Splint ConfigurationManage Cast and Splint Codes
NextGen® Adaptive Content Engine Help Enterprise 8
The discharge instructions in the run-time Procedure Patient Discharge Instructions panel are in the same order as the procedure order in the grid on the Procedure Order & Discharge Instruction practice template. In the practice template, you can sort the discharge instructions in the grid as follows: To view discharge instructions configured for a specific specialty, click Specialty and then select a specialty from the list. Click the Patient Discharge Instructions option. (Optional) Select a Procedure and Category. The grid displays the pre-configured discharge instructions associated with the selected procedure and category. Select any of the following Sort options below the grid: Category - To change the position of the discharge instructions associated with the selected category based on the selected sort functionality. Instruction - To change the position of the discharge instruction in the grid based on the selected sort functionality. Highlight a discharge instruction in the grSort the Patient Discharge Instructions
NextGen® Orthopedic Suite Help 80.2.14.0
You can use the Waterproofing panel of the Cast & Splint Configuration practice template to enable and configure waterproofing codes that are applied to casts. Before you configure casts and splints, determine if waterproofing will be used and, if so, what waterproofing codes will be used. Add a Waterproofing Code Remove a Waterproofing Code Parent topic: Cast and Splint Configuration