Enter IOP Measurement Data on Exam Templates
On the
Eye Configuration
template, go to the
IOP
section.
Click the
kPa
field for
OD
and enter a value using the on-screen numeric keypad or your keyboard.
Repeat for
OS
.
Recommendations
Explore
NextGen® Adaptive Content Engine Help Enterprise 8
Set IOP Measurement Ranges for High and Low Values
On the Eye Configuration template, go to the IOP section. Set abnormal value ranges for mm Hg by clicking the following fields and selecting a value from the list: Abnormal value (High) field for mm Hg Abnormal value (Low) field for mm Hg Select the Use kPa fields for IOP measurements check box. Selecting this setting causes additional data entry fields for documenting kilopascal (kPa) values to appear in the IOP panel or section. By default, this setting is not selected. Set abnormal value ranges for kPa by clicking the following fields and using the on-screen number pad or your keyboard to enter values: Abnormal value (High) field for kPa Abnormal value (Low) field for kPa Parent topic: IOP Measurements
NextGen® Adaptive Content Engine Help Enterprise 8
IOP Measurements
IOP Measurements IOP Measurements The settings in the IOP Measurements section of the Eye Configuration practice template enable practices to choose whether to display fields for documenting measurements using kilopascal values, and to define high and low abnormal values for measurements in mm Hg and kPa on the IOP panel or section of exam templates. Setting abnormal values here causes an Abnormal findings present alert to appear on the IOP panel when one of these values is met or exceeded. iop measurements section These additional fields for kilopascal (kPa) values are saved as additional columns in the IOP data grids on the templates. The following shows the kilopascal (kPa) fields on the Oph Eyetech template when documenting preliminary exam findings. oph eyetech template Set IOP Measurement Ranges for High and Low Values Enter IOP Measurement Data on Exam Templates Parent topic: Oph Setup - Eye Config Practice Template
NextGen® Ophthalmic Suite Help 2022.2
Update IOP Findings
Highlight a row with data to be edited or viewed in detail in one of the grids on the IOP panel. Click Edit to open the Oph EyeTech template. Expand the IOP panel. Historical IOP data appears in the grid. The data entry fields above the grid are read-only and display values contained in the highlighted row for both eyes. Double-click the desired row in the IOP grid to update data. The IOP mm Hg and kPa – OPH extended template or IOP Extended - OPH template opens. iop extended - oph template To update IOP measurements in mm Hg, click the corresponding OD and OS fields and select from lists. To update IOP measurements in kPa, click the corresponding OD and OS fields and type the value or click the blue arrow and enter values using the numeric keypad. Enter comments in the Comments field. Click Save. Click Clear For Add to clear template fields and enter new values, if appropriate. Click Close. Do one of the following: On the IOP panel on the Oph EyeTech template, click Clear to change th
NextGen® Ophthalmic Suite Help 2022.2
View Graph of IOP Findings
Click the Graph link on the IOP exam panel. The Oph Eye Graphs template opens and displays intraocular pressure data. oph eye graph Parent topic: IOP Exam
NextGen® Ophthalmic Suite Help 2022.2
Document IOP Findings
Expand the IOP panel. The Historical IOP data appears in the grid. To track the reduction between pre-treatment IOP and the IOP during or after treatment, starting with the current encounter: Click a Baseline IOP field and select an appropriate baseline pre-treatment value from the list or select the top blank line and type in a value. Enter a Baseline IOP value for OD and OS. Note: Baseline IOP values are entered one time. Click the Method field and select the method used for measuring IOP from the list or select the top blank line and type a value. To enter findings for intraocular pressure using mmHg. Click the OD field and select a value in the list. The list for OS opens automatically. Select a value for OS. Enter findings for intraocular pressure using kPa for OD and OS. The name of the current user fills the Taken by field. Type comments in the Comment field. If the patient was dilated while the measurements were taken, select the Dilated IOP check box. Note: The Dilated IOP che
NextGen® Ophthalmic Suite Help 2022.2
IOP Measurements
IOP Measurements IOP Measurements The settings in the IOP Measurements section of the Eye Configuration practice template enable practices to choose whether to display fields for documenting measurements using kilopascal values, and to define high and low abnormal values for measurements in mm Hg and kPa on the IOP panel or section of exam templates. Setting abnormal values here causes an Abnormal findings present alert to appear on the IOP panel when one of these values is met or exceeded. iop measurements section These additional fields for kilopascal (kPa) values are saved as additional columns in the IOP data grids on the templates. The following shows the kilopascal (kPa) fields on the Oph Eyetech template when documenting preliminary exam findings. oph eyetech template Set IOP Measurement Ranges for High and Low Values Parent topic: Eye Configuration Practice Template
